Send Email
Send SMS
Search
Royal Traders


Cold Welding Stick

Welding Stick for Cold Welding forCold Welding Process

Uses: Steel,Copper,Cast iron, Brass etc
tensile Streginth :3500 psi
Make : Deltabond USA

Packing Available in:

114 gm in stick
1 LBS Box

Ceramic HT Deltabond

REQUEST CALLBACK

Ceramic HT Deltabond
Approx. Rs 4,500 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity1 Kilogram
Packaging Size1KG
Packaging TypeTWO COMPONENTS
ColorBRICK RED
BrandDELTABOND USA

CERAMIC HT DELTABOND USA:Solvent less, transparent Delta Bond HT CERAMIC offers high quality , tough, semi flexible coating possesses excellent adhesion and bonds strongly to suitably prepared metal, wood and concrete surface. Suitable for sealing and as primer coat prior to final coat.
Suitable for atmosphere where moisture, hydrocarbons, oil, alkalis and acids and fine particles are encountered. Suitable for high temp. applications.
Applications :- Base coat for tanks, steel and concrete structures, pipelines, valves, and water sewage treatment plants etc. Used as bond coat prior to final coating on practically all applications.
Technical specifications:-
Mising ratio :- Part A:Part B = 2:1 by weight.
Pot Life :- 1 hr.
Heat Deflection Temp. :- 110 * C.
Shore Hardness :- 75 D
No Load Setting Time at 25*C :- 8 hrs.
Full Curing Time at 25*C:- 7 Days.
Application :- By Brush or Spary.
Recoat Time :- 4-24 hrs.
Coverage Area:- 1 kg. set will cover 4-5 sq. mtr. at a about 200-250 micron thickness depending on the substrat.
Surface Preparation:-
Metal:-
1-Brush away loose contaminants. Remove dirt, oil, grease, paint...
2-Sand the surface till the necessary standard of cleanliness can be achieved to a depth of 75 microns.
3- If sand blasting not possible, clean the surface with mechanically sander to a near white finish. Clean finally thoroughly with Delta Bond Cleaner.
Concrete:- Remove all loose contaminants, dirt, oil, grease, paint. Clean thoroughly with Delta Bond Cleaner. Use dilute Hydrochloride acid if required to remove lateince of concrete, Neutralise the surface thoroughly, using plenty of water. Blast clean if possible or clean mechanically.
Application :- Mix all the content of part B with part A and stir thoroughly 2-3 mins. Apply using short Bristle brush on cleaned surface.


Additional Information:

  • Item Code: RT617
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: NEW DELHI
  • Production Capacity: 1000
  • Delivery Time: 4WEEKS
Yes! I am Interested

Ceramic Coat High Performance DeltaBond 6002

REQUEST CALLBACK

Ceramic Coat High Performance DeltaBond 6002
Approx. Rs 6,500 / Pack
Get Best Quote
Product Details:
Minimum Order Quantity1 Pack
ColorGLASS MIRROR DARK RED
BrandDeltabond USA
Packaging SizeI LBS
Packaging Typebox

Ceramic Coat High Performance DELTA BOND-6002- a brushabale grade ceramic coating extreme resistance to corrosion / erosion, repairs damaged components as well as protects the new equipment

Product:

• DELTABOND 6002 1lb/. 454kg Color mirror Red

Description: a two-component, High-Performance, Brushable Ceramic Coating Used for Protecting, Sealing and Repairing Surfaces Which are Subject to Corrosion, Wear and Erosion.

Application: seals and protects tube sheets, water boxes, impellers, pump housings, tanks, cyclones, gate valves and other metal surfaces against corrosion, abrasion and harsh chemicals. It provides a very hard, smooth and glossy surface.

Physical properties:

• Color red or blue
• Pot life @ 24ºc (75°f) 25 minutes
• Viscosity heavy liquid
• Mixed viscosity 32,000 cps
• Cure shrinkage 0. 0007 in/in
• Temperature resistance 250°f (121ºc)
• Hardness (shore, astm d 1706) 84d
• Coverage 1lb covers 6. 5 sq. Ft. @ 15 mil thick
• Coefficient of thermal expansion 75 x 10- 6 cm/cm/ºc
• Compression strength (astm d 695) 15,400 psi
• Tensile strength (astm d 638)4,800 psi

Chemical resistance:

• Hydrochloric acid 15% very good
• Sea water very good
• Sulfuric acid 20% very good
• Gasoline very good
• Water very good
• Ammonia very good
• Caustic soda 30% very good
• Benzene poor
• Xylene very good
• Toluene good
• Ethanol 50% good
• Mek good
• Methylene chloride poor

Yes! I am Interested

Devcon Steel Epoxy

REQUEST CALLBACK

Devcon Steel Epoxy
Approx. Rs 6,500 / Pack
Get Best Quote
Product Details:
Minimum Order Quantity1 Pack
Chemical CompositionEpoxy, Epoxy
Material CompatibilityCeramic, Ceramic, Concrete, Concrete, Metal, Metal

Devcon Steel Epoxy

1. Maintenance and Repair Epoxies
a) Titanium Putty
b) Brushable Ceramic
c) Wear Resistance Putty
d) High Temp wear guard
e) Devcon Z

2. Metal Filled Epoxies
a) Plastic Steel Putty
b) Alumnum Putty
c) Bronze Putty
d) Stainless Steel Putty

3. Flexane Urethanes
a) Flexane Putty
Yes! I am Interested

Titanium Alloyed Putty Deltabond-5033 USA

REQUEST CALLBACK

Titanium Alloyed Putty Deltabond-5033 USA
Ask for Price
Product Details:
Minimum Order Quantity1 Set
Raw MaterialEpoxy
Putty FormLiquid

Titanium Alloyed Putty Deltabond-5033 USA, fast cure steel filled putty repair kit. Chemical Resistance. Wet Surface Repair Putty features: Bonds to aluminum, concrete, and many other metals Bonds to ferrous and non-ferrous metals Non-rusting Bonds to wet surfaces Bonds, patches, and seals metals Non-sagging.
Specification:• Repairing and refitting pipes, valves, pumps, and tanks. Repair concrete vessels and piping in wet environments.• This product will bond to a wet or damp surface.

Physical Properties

  • Compressive strength----18500 psi
  • ASTM 695
  • Corrosion Resistance-----5000 hoursASTM B117
  • Flexural strength---------10000 psi
  • ASTM D 790
  • Hardness (on Shore D)-- 90
  • ASTM D 1706
  • Temperature Resistance-- 180 0c
  • Tensile Shear Strength---  2500 psi
  • ASTM D638
  • (Grit Blasted Steel)

Chemical Resistance

  • Hydrochloric Acid 10% - Very Good
  • Hydrochloric Acid 50% - Good 
  • Sulfuric Acid 10% -        Very Good 
  • Sulfuric Acid 50% -        Good 
  • Water                  -        Excellent
  • Ammonia             -        Excellent
  • Sodium Hydroxide 10%-  Excellent
  • Gasoline, Oil Kerosene -   Excellent 
  • Mineral Spirits            -    Excellent
  • Toluene                     -    Good
  • Methanol                   -     Fair
  • MEK                          -    Fair
  • Propylene Glycol         -    Excellent
  • Trisodium Phosphate 5% - Excellent 
Yes! I am Interested

Zirconium Powder Insulation Coating Temp Up To 1500 C

REQUEST CALLBACK

Zirconium Powder Insulation Coating Temp Up To 1500 C
Approx. Rs 1,850 / Kilogram
Get Best Quote

Zirconium coating powder brushable based heat/cold insulation - till 1500 *c

Specification:
  • Mixing ratio: Single component
  • Pack size: 1kg


Additional Information:

  • Minimum Order Quantity: 1 Kilogram
Yes! I am Interested

Ceramic Alloyed Putty Machinable Deltabond 6001 USA

REQUEST CALLBACK

Ceramic Alloyed Putty Machinable Deltabond 6001 USA
Approx. Rs 6,500 / Pack
Get Best Quote
Product Details:
Minimum Order Quantity1 Pack
Putty FormLiquid
Packing SizeI LBS(483 GRAM)
Packaging TypeTWO COMPONENTS
BrandDELTABOND 6001 USA

Ceramic alloyed putty machinable (FOR METAL BUILDUP )

Chemical Resistance

A two part wear resistant epoxy compound,made of special Resins,Superior Additives,internal Lubricants and Distinetive Curing Agents

Make Delabond 6001 USA
High Tensile Strength

MOQ - I LBS
Yes! I am Interested

Floor Coating Seamless Pu Epoxy Deltabond USAF-200

REQUEST CALLBACK

Floor Coating Seamless Pu Epoxy Deltabond USAF-200
Approx. Rs 2,000 / Pack
Get Best Quote
Product Details:
Minimum Order Quantity1 Pack
BrandDELTABOND USA
Pack Size1KG,20KG,30KG
Packaging TypeSTD
ApplicationIndustrial Use, Domestic Use

FLOOR COATING PU EPOXY DELTABOND USA F-200:Provides a hard wearing, hygienic, chemical resistant.
Application :-
Clean rooms, Laboratories, Food and Sugar Industries, Show Rooms, Amenity blocks, Operation Theaters, Hospitals, Kitchens.
Technical Specifications:-
Mixing ratio :- Part A:Part B=4:1 by weight., Pot life :- 1 Hr, Heat Deflection Temp. :- 65*C , Shore Hardness :- 80 D, No load setting Time at 25 *C:- 16 Hr. Full Curing Time at 25*C:- 7 Days.
Application :- By Brush, Flow or Spray. Recoat Time :- 4-24 hrs.
Coverage Area :- a kg. set will cover 1-1.5 sq mtr. at a about 500 micron thickness depending on the substrate.
Packing : 1 kg., 20 kg., 30 kg.
Surface Preparation :-
Metal :-
1-Brush away loose contaminants, Remove dirt, oil, grease, paint....
2- Stand the surface till the necessary standard of cleanliness can be achieved to a depth of 75 microns.
3- If stand blasting not possible, clean the surface with mechanical sander to a near white finish.
Concrete :- Remove all loose contaminants, oil, grease, paint. Clean thoroughly with Delta Bond Cleaner.
Use Dilute Hydrochloric Acid If Required To Remove Laitance Of Concrete. Neutralize The Surface Thoroughly, Using Plenty Of Water, Blast Clean If Possible Or Clean Mechanically.
Application:- Mix All The Content Of Part B With B Part A And Stir Thoroughly For 2-3 Mins. Apply Using Short Bristle Brush On Cleaned Surface.
Color:red, Blue, Black,green,yellow ,orange
Yes! I am Interested

Chemical Epoxy Metal And Concrete Set Deltabond Usa

REQUEST CALLBACK

Chemical Epoxy Metal And Concrete Set Deltabond Usa
Approx. Rs 4,000 / Kilogram
Get Best Quote
Product Details:
Minimum Order Quantity1 Kilogram
State/FormLiquid
Surface of ApplicationMETAL AND CONCRETE
Packaging Size (ex. 1L or 1Kg)IKG,20KG,30KG
ColorRED BROWN
BrandDELTABOND CHEM USA

CHEMICAL EPOXY DELTABOND USA:Based on high performance polymer technology with high cross linking density, Solventless coating is designed to meet the highest standards of chemicl resistance along with corrosion, erosion and abrasion protection achievable.Excellent barrier coating tank inner lining, Suited to treatment of steel, concrete and brick in applications where acids alkalies, organic Solvents and aggressive process chemicals are encountered.
Applications :- Tanks and vessels pipelines and valves, scrubbers, acids sumps and drains, acid proof roofing, acid bunds, steelwork and concrete coating etc. water, slurry chemicals pipelines, storage tanks, structures metallic surface weakened by corrosion of oil, chemicals, acids solvent resistant coating on insides of concrete reservoirs chemical storage tank, shafts, impellers, coating the insides of pumps handling fluids flowing at high velocities with particulate matter, sugar mill roller shell sides head stock etc.
Technical specifications:-
Mixing ratio :- Part A:Part B= 4:1 by weight.
Pot life :- 1 hrs.
Heat Deflection Temp. :- 90 *C.
Shore Hardness :- 72 D.
No Load Setting Time at 25 *C :- 8 hrs.
Full Curing Time at 25 *C :- 7 days.
Application :- By Brush.
Recoat time :- 4-24 hrs.
Coverage Area :- 1 kg. set will cover 1.5-2 sq. mtr. at a about 500 micron thickness depending on the substrate.
Surface Preparation-Metals-
1- Brush Away Loose Contaminants. Remove dirt, oil, grease, paint.
2- Stand the Surface till the Necessary Standard of Cleanliness Can be Achieved to a Depth of 75 Microns.
3- If stand Blasting not possible, clean the surface with mechanical sander to a near white finish. Clean finally throughly with DELTABOND CLEANER.
Concrete:- Remove all loose contaminants, dirt, oil, grease, paint. USE DILUTE Hydrochlorid Acid if required to remove lateince of concrete. Neutralise the surface thoroughly, using plenty of water. Blast clean if possible or clean mechanically.
Application:-
Mix all the content of part B with part A and stir thoroughly for 2-3 mins. Apply using short Bristle brush on cleaned surface.

Yes! I am Interested

 
X


Call Us: +91-8079455815
Royal Traders
Devinder Madaan (Proprietor)
SCO 144, Sector 28/D-F-2 ,
Chandigarh - 160002, India
Contact via E-mail
Contact via SMS



Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us   |   Mobile Site

© Royal Traders. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Royal Traders